Guide to Disassembling the Rear Seat Back Plastic Panel of Xiaomi SU7 Pure Electric Car
Introduction
Welcome to our guide on disassembling the rear seat back plastic panel of the Xiaomi SU7 pure electric car. Whether you're a DIY enthusiast or simply need to access components beneath the rear seat, this step-by-step walkthrough will assist you in safely removing the panel without causing any damage.
Step 1: Preparation
Before starting the disassembly process, ensure that the car is parked on a level surface and turned off. Gather the necessary tools, including a screwdriver set, trim removal tools, and protective gloves.
Step 2: Accessing the Rear Seat
To access the rear seat back plastic panel, first, open the rear doors of the Xiaomi SU7. Then, gently pull the seat belt buckles away from the center of the car to create space.
Step 3: Removing the Seat Cushion
Locate the retaining bolts securing the rear seat cushion to the floor of the car. Typically, these bolts are located at the front of the cushion near the floor. Use a suitable wrench or socket set to loosen and remove the bolts.
Step 4: Lifting the Seat Cushion
Once the bolts are removed, carefully lift the rear seat cushion upward to disengage it from the retaining hooks. Set the cushion aside in a safe location.
Step 5: Detaching the Plastic Panel
With the seat cushion removed, you'll now have access to the plastic panel covering the back of the rear seat. Use a trim removal tool to gently pry along the edges of the panel, releasing the clips that secure it in place.
Step 6: Disconnecting Electrical Connections (if applicable)
Depending on the configuration of your Xiaomi SU7, there may be electrical connections running to components behind the plastic panel. Carefully disconnect any wiring harnesses or connectors to avoid damage.
Step 7: Removing the Panel
Once all clips and electrical connections are detached, carefully lift the plastic panel away from the rear seat. Take care not to force or bend the panel excessively, as this may cause damage.
Step 8: Accessing Components
With the plastic panel removed, you'll have full access to components such as the rear seatbelt mechanisms, speaker assemblies, and possibly even the vehicle's wiring harness. Perform any necessary maintenance or upgrades as required.
Conclusion
Congratulations! You've successfully disassembled the rear seat back plastic panel of your Xiaomi SU7 pure electric car. Should you require further assistance or encounter any challenges during reassembly, consult the vehicle's manual or seek professional help to ensure everything is properly secured and functioning correctly. Happy driving!
Additional Information

Xiaomi SU7 Specifications:
Wheelbase: 3000mm
Range: 668-800km
Curb weight: 1980/2250kg
Gross weight: 2430/2655kg
Dimensions: 4997×1963×1440/1455mm (L×W×H)
Top speed: 265km/h
Power: 299 horsepower
Battery Type: Lithium-ion (specifically, ternary lithium-ion)
Manufacturer Information:
Manufacturer: Beijing Automotive Group Off-Road Vehicle Co., Ltd.
Motor Manufacturer: Suzhou Huichuan United Power System Co., Ltd.
Battery Manufacturer: Contemporary Amperex Technology Co., Ltd. (CATL)